[Prewer]

Hey all, heres a few pics to start with of my install that im doing in my boot, im fitting my 2 clarion v-net 12 inch subs,with my alpine MRD-300 mono block amp and a 4 channel amp to run my splits

ill do it as a step by step in pics, only started on the during last week, and this is what im currently up too

first up,startedoff with a bare boot and a handfull of wiring





next, built up the sub floor as i have to raise up the first level slightly as i have a tow pack and the bars and bolts stick up by about 14 mm



and now, have the lower floor boxbiult,ready to recess the amps and other gadgets into, digital voltmeter, neons, strobes, halogen lamps etc...



thats it for now, ill update with some more over the next couple of days as more progress continues...

[V8RMBL]

Looks the goods mate, I'm guessing the amps will be in the floor and the subs on top of the diff tunnel?

That should have a decent note to it


BTW - Grinder + Wire wheel, clean the rust up and spray some paint down on the floor, just to clean the rust up in the spare tyre well

[GTS071]

Looking good big guy!

When do you expect to have it competed?

[PWR 051]

looking good..
looks similar to the set up i will have in the vn..will wait and see for more pics

[Prewer]

V8RMBL, on Feb 21 2006, 08:45 AM, said:

Looks the goods mate, I'm guessing the amps will be in the floor and the subs on top of the diff tunnel?

That should have a decent note to it
BTW - Grinder + Wire wheel, clean the rust up and spray some paint down on the floor, just to clean the rust up in the spare tyre well

lol, yeah done that mate, cleaned up the rust and painted with some spray sound deadner and black spray paint

GTS071, on Feb 21 2006, 09:36 AM, said:

Looking good big guy!

When do you expect to have it competed?

hoping in bout 4 weeks, or atleast most of it by the devonport regatta audio comp

GTS 049, on Feb 21 2006, 12:43 PM, said:

yeah its looking good manteray , are you doing this yourself or is big manteray helping you ?

nah mate, just me this time


heres th pic with the sound deadner and black spray paint, only a small amount required here, not much to bounce up and down on at the bottom here,all the weight should keep it down nicely

Attached File(s)

•  sound_deadner.bmp (739.86K)
  Number of downloads: 154

[V8RMBL]

Not seeing anything....


is it done with magic ink or something?

[GTS071]

Nah you have to draw your own boot install!

And the winner of the best install get to do all of the work for Prewer

[Prewer]

lol, try this ya stooge

V8RMBL, on Feb 22 2006, 08:25 AM, said:

Not seeing anything....
is it done with magic ink or something?

try this one



Am back into it this afternoon, its cup day today, get the arvo off, and not going to the lonny cup, so should get heaps of progress done this afternoon, ill update with pics later on this evening

This post has been edited by 9psi-vr: 22 February 2006 - 11:59 AM

[2NSPYR]

looking good man i started mine the other day. but i will wait i think and chat to ya bout it once yours is done and get some tips

[Prewer]

Heres what i did in the afternoon, only a couple of hours tho (bloody family bbq)

Picked up a sheet of 18mm MDF 2400 x 1200 from bunnings, got it roughly cut to size there and brought it home



then cut out to size the floor that will have perspex recessed into it as i have a floor underneath this one

1/2 done




all done


and on this side, the wall that i have made here will hold 2 fire extinguishers and will also have a digital voltage guage recessed into it (ran out of time on that one to make the recessed box in this wall tho )

before shot



after shot


thats it for now, the next stage is to draw up measurements for the sub box to house the 2 12 inch subs, cut it out to size and put it all together

[BLOWN-VT]

got rust

[V8RMBL]

Guessing spare tyre not an issue?

[Prewer]

got a can of this mate , tyreweld

this is the only link i could find of the stuff

http://shop.greenfue...Category_Code=3

This post has been edited by 9psi-vr: 22 February 2006 - 07:32 PM

[2NSPYR]

whos upholstering it for ya? looks good